Item

Specifications

• Module having crystalline silicon solar cells
• The module efficiency not less than 10%.
• The terminal box on the module has a provision of opening it for replacing the cable.
• a) Name of the Manufacturer and/ or distinctive Logo b) Model and/ or Type No. c) Serial No. d) Year of manufacture.

1. he colour temperature of W-LED(s) used in the system is  in the range of 5500oK –6500oK.
2. W-LED(s) doesn’t  emit ultraviolet light.
3. The light output from the W – LED is constant throughout the duty cycle.

1. Efficiency of the electronic system is > 85%.
2. Electronics have temperature compensation for proper charging of the battery throughout the year.
3. 3. The idle current should is less than 1 mA
4. The PCB containing the electronics is capable of solder free installation and replacement.
5. Necessary lengths of wires/ cables, switches suitable for DC use and other protections is provided.

1. Adequate protection is incorporated for “No Load” condition.
2. The system has protection against battery overcharge and deep discharge         conditions.
3. The load reconnect is provided at around 80% of the battery capacity status.
4. Adequate protection is provided against battery reverse polarity.
5. A fuse is provided to protect against short circuit conditions.
6. Protection for reverse flow of current through the PV module is provided.